This Article describes how to make brake troubleshootng and adjustments for your WWII Jeep. Applies to 1942,42,1943,43,1944,44,1945 Jeeps models
|
1. This article is a work in process. The foundation of this article came from the TM-1513 brake section which describes trouble shooting your brakes. This article also has suggestions from users who have experienced issues with brakes as well. |
|
2. Most likely Remedy |
|
3. Most likely Remedy a. Adjust brakes correctly b. Replace brake hose c. Replace retracting spring d. Replace Wheel Cylinder e. Adjust/replace wheel bearing |
|
4. Most likely Remedy |
|
5. Most likely Remedy a. Adjust b. Replace lining c. Locate and repair d. Replace or Regrind e. Replace brake lining f. Fill master cylinder/bleed lines |
|
6. Most likely Remedy |
|
7. Most likely Remedy a. Replace lining b. Major adjustment c. Replace brake shoes d. Replace or regrind drums |
|
8. Most likely Remedy |
|
9. Brakes - Presure build up? If your brake lever rod is tightened to much, the Master Cylinder piston will not fall back far enough to release fluid back into the inlet |
|
10. Test Wheel Cylinders with Drums ON! In this case, wheel cylinder appears to be blasted out, it is not! In order to bleed and test your brakes your wheel drums need to be installed! |
|
11. Please submit experiences, and we will post them .... |
